
Signature Floor Coat
Signature floor coat is a thin film trowel on cement coating ideal for domestic and light commercial venues. A two-coat application with a total film thickness of 1.6 – 1.8mm and can be applied onto various surfaces including new screeds or directly over tiles with the correct preparation.
IS IT EASY TO CHANGE BLOG LAYOUTS? +
Curabitur ullamcorper ultricies. Nam eget dui. Etiam rhoncus tempus ultricies. Maecenas tellus eget condimentum rhoncus, sem quam semper libero, amet adipiscing sem penatibus et magnis rhoncus.
HOW CAN I PERSONALIZE MY PORTFOLIO? +
Curabitur ullamcorper ultricies. Nam eget dui. Etiam rhoncus tempus ultricies. Maecenas tellus eget condimentum rhoncus, sem quam semper libero, amet adipiscing sem penatibus et magnis rhoncus.
WHAT IS PARALLAX AND HOW CAN I USE IT? +
Curabitur ullamcorper ultricies. Nam eget dui. Etiam rhoncus tempus ultricies. Maecenas tellus eget condimentum rhoncus, sem quam semper libero, amet adipiscing sem penatibus et magnis rhoncus.
Product Info
Product | Signature Floor Coat |
Type | Modified cement coating |
Application tools | Steel Trowel |
Final thickness – 2 coats | 1.6mm – 1.8mm |
Coverage | Approx.20 -25m² per coat dependent on surface |
Kit | 1 x 25kg Bag |
Colours | 8 Colours |
Ambient Temperature | 6 – 25 °C |
Cement Temperature | 6 – 25 °C |
Pot Life | 3 Hours |
Work time once mixed | 3 Hours |
Initial set once applied | 4 Hours (weather dependent) |
Additional coats | After initial set |
Curing | After final coat allow 48 hours prior to sealing |
Storage | On a pallet in a cool dry area |
Signature Floor Coat is ideally applied onto a well cured (28 days) cement or concrete substrate. Toppings should be integrally sound, have good compressive strength (25MPa – 30 MPa) and be free from cracking, crumbling or scuffing. All toppings should comply with NHBRC regulatory standards and have a moisture content of less than 5%.Ideally expansion joints should be allowed every 3 to 4 meters and should be placed corresponding with the base concrete joints.
Due to Signature Floor Coat being a thin film coating the product should be applied to an even surface and will not rectify valleys and ridges but will simply follow the existing floor or wall level.